Budnick Converting ®
Permacel/Nitto Denko America
P232
***Discontinued*** PET Electrical Insulating Tape
DISCONTINUED BY PERMACEL Please use Compare-A-Tape to locate a substitute.
P232 is a 2.5 mil, polyester film, electrical insulating tape. It is ideal for tabbing and holding silicone varnished glass cloth used as a ground, barrier and outer protective insulation in large stick wound and form wound transformer, reactor and solenoid coils. P232 is widely used for holding winding starts, tap breakouts, and finish turns of small stick and bobbin wound coils. It performs holding functions with other silicone insulations and silicone-treated materials.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Silicone |
| Thickness | 2.5 Mils |
| Tensile | 20.00 lbs/in |
|---|---|
| Elongation | 100.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 22 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- A very economical insulating tape with a silicone adhesive
- Solvent resistant
- Cured silicone adhesive
- Non-corrosive characteristics permit its use with fine magnet wire
- Combats the incompatibility & reversion problems caused by rubber/resin adhesives used with silicone resins
- Assures dielectric barrier for continuous 180°C operation
Adhesive Tape Applications
- Mounted miniature transformers, reactors, relays & other components
- Tabbing & holding silicone varnished glass cloth
Adhesive Tape Colors
- Red
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.