Budnick Converting ®
Permacel/Nitto Denko America
P421
5-Mil PTFE Film Tape
P421 is a 6.5 mil, PTFE film tape. It is ideal for use wherever a slick surface is needed to speed up the movement of materials or reduce equipment wear. P421 is often used to prevent electrolytic corrosion of dissimilar metals, and to mask parts placed in chemical, cleaning or electroplating solutions. It is also used as an anti-vibration cushion, as a gasket for flanges, joints and clamp connectors; and as a high temperature release surface on heat sealer bars and rollers.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PTFE - Skived |
|---|---|
| Adhesive | Silicone |
| Thickness | 6.5 Mils |
| Tensile | 30.00 lbs/in |
|---|---|
| Elongation | 300.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 25 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 500° F |
| Max Long-Term Temp |
Product Features
- Resistant to chemical, acids, solvents, fuels & most alkalies
- Can operate over a temperature range of 250° to 500° F
- Provides a slick surface to speed up the movement of materials or reduce equipment wear
- Used as a high temperature release surface on heat sealer bars & rollers
Adhesive Tape Applications
- Used as anti-vibration cushion for flanges, joints & clamp connections
- As a gasket
- Roller covering
- High temperature release surface
- Lining discharge chutes
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.