Budnick Converting ®
Saint-Gobain
HM430
High Modulous PTFE Tape ***Discontinued***
Discontinued HM430 is a 3.5 mil, high modulous PTFE tape with acrylic adhesive. The film has been subjected to a special process that lowers its elongation and increases its breaking strength for easier handling. HM430 is often used as masking during metal bonding, roll covering on plastic extruders, and for fine wire harnesses. It is chosen for lay flat operations where anti-friction properties and solvent resistance are required.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PTFE - Hi Modulous |
|---|---|
| Adhesive | Acrylic |
| Thickness | 3.5 Mils |
| Tensile | 25.00 lbs/in |
|---|---|
| Elongation | 150.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 25 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | -20° F |
| Max Short-Term Temp | 310° F |
| Max Long-Term Temp |
Product Features
- Excellent high temperature resistance
- Chemically inert
- Weather resistant
- Stable & non-toxic
- Low coefficient of friction
- Thin & conformable
- Solvent resistant
Adhesive Tape Applications
- Masking during metal bonding, roll covering on plastic extruders & for fine wire harnesses
- Lay-flat operations where anti-friction properties & solvent resistance are required
Adhesive Tape Colors
- White
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.