Budnick Converting ®
Saint-Gobain
T
PTFE Film
T is a 6 mil, PTFE film with silicone pressure sensitive adhesive. It is often used as an excellent release surface on packaging equipment and heat sealing machines, roll coverings on plastic extruders, guide rails, and angle bars in the graphic arts industry.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PTFE - Skived |
|---|---|
| Adhesive | Silicone |
| Thickness | 6 Mils |
| Tensile | 25.00 lbs/in |
|---|---|
| Elongation | 275.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 30 oz/in |
| Min. Application Temp | 20° F |
|---|---|
| Min. Service Temp | -100° F |
| Max Short-Term Temp | 500° F |
| Max Long-Term Temp |
Product Features
- Excellent high temperature resistance
- Chemically inert
- Weather resistant
- Stable & non-toxic
- Low coefficient of friction
- Thin & conformable
Adhesive Tape Applications
- Release surface on packaging equipment & heat sealing machines
- Roll coverings on plastic extruders, guide rails & angle bars in the graphic arts industry
- Heat insulation during soldering of shielding cable
- High temperature insulation of thermostat connections in equipment
- Release surface on label applicators
- Reduces friction on guide rail chutes
- Prevents glue build up in book binding equipment
Adhesive Tape Colors
- White
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.