Budnick Converting ®
Saint-Gobain
V8212
.375" Single Coated 6# Closed Cell PVC Foam
V8212 is a 3/8" thick , 6#, closed cell Polyvinylchloride (PVC), with an acrylic adhesive system on one side. Norseal® V820 series. Primarily used for light, air, and moisture seals in a variety of applications.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PVC - Polyvinylchloride |
|---|---|
| Adhesive | Acrylic |
| Thickness | 375 Mils |
| Tensile | |
|---|---|
| Elongation | 125.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 64 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | -15° F |
| Max Short-Term Temp | 180° F |
| Max Long-Term Temp | 180° F |
Product Features
- Available in black
- Paper liner
- Flexible backing
- Dimensionally stable
- Tensile Strength : 13.7 PSI
- Density : 6lbs./cu. ft.
- Thermal Conductivity= .27
- Excellent for all climates; withstands wide temperature range
- Excellent conformability and adapts to irregular surfaces
- Low deflection force causes no distortion of thin gauge plastics and metals
- Aggressive adhesive allow for easy installation
- Dimensionable stable under compression. Will not ooze, drip or shift
Adhesive Tape Applications
- Light and dust seals
- Suspended ceilings
- Refrigeration
- Wall systems
- Industrial/Electronic equipment cabinets
- Toolbox lid seal
- Squeak & rattle prevention
Adhesive Tape Colors
- Black
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.