Budnick Converting ^®

P12L is a woven cloth laminated with a dead soft aluminum foil and presented on a release liner. This tape is used for sound & vibration damping, sheet metal repair and aircraft stripping mask.

P55 is a flame retardant, double-coated cloth tape primarily used in industrial applications where flame retardant material is demanded.

P50 is a multi-purpose, double-coated cloth tape primarily used in carpet installation, holding and mounting and the attachment of printing plates to printing cylinders.

P11 is a 5 mil, dead soft aluminum foil tape primarily used for sealing, heat shielding and as a protective cover for critical parts.

P172 is a 5 mil glass reinforced strapping tape primarily used in general purpose strapping applications.

597B is a general purpose, 2.8 mil acrylic adhesive transfer tape. It is a highly versatile tape used for mounting, bonding & laminating papers, films, foils, metals and fabric.

923S is a 4 mil total thickness, specially oriented, PTFE film tape. It's release properties are ideally suited for roll wrapping, lining chutes, vibration gaskets & cloth lamination.

P02 is a, 7.5 mil, double-coated, flat kraft paper tape. It is designed for a variety of splicing, mounting, holding, laminating and fastening applications.

5033X is a 5.2 mil, non-woven, double coated tissue. It is primarily used for splicing in the paper & corrugated industry.

P430 is a 3.5 mil, PTFE film tape. It is engineered primarily for anti-friction masking, flashing, release and separator applications.

509AH is a 4.7 mil, double coated, repulpable, flying splice tape. It is specifically developed for applications where high-speed flying splices are required in areas of high heat and humidity.

525 is a 20 mil double coated butyl adhesive tape used for waterproof carpet mounting and sealing joints of gypsum, plywood, plastic and metal sheets.

Nitto EE1010 (EPT Sealer) is a pressure-closed-cell foam joint-filling material used to fill gaps found in a variety of structures. EE 1010 can be used as a waterproofing, windbreak, dust-proofing, sound damping or thermal insulating material. EE1010 is laminated with a double coated acrylic adhesive for general purpose use.

P425 is a 4.5 mil PTFE film, etched on both sides for extreme wire harness wrapping and bundling applications.

P420 is a 3.7 mil skived/pigmented PTFE film used for wrapping rollers and composite tooling to prevent buildup of resins, PE & PP coatings.

P427 is a 5 mil, PTFE film tape with silicone adhesive used for anti-friction and anti-sticking applications particularly on heat seal packaging machines.

P245HDF is a 7 mil, PETfilm/PET non-woven electrical insulating tape is the flame retardant version of the P245HD.

229 is a 0.209 mm vinyl tape.

5000N is 6.3 mil, double coated non-woven fabric that is suited to uses that need recycling.

5000N(C)B is 6.3 mil, double coated non-woven fabric that is suited to uses that need recycling.

SPV 4088R is a surface protection tape suitable to protect lacquered plates, glass, plastics, and decorative laminates during mechanical processes, storage, and transportation.

P367

Nitto PVC 225 is a high-grade flame-retardant electrical insulating tape consisting of a pure PVC carrier coated with a rubber-based pressure sensitive adhesive. The tape is certified for electrical purposes and classified under IEC 60454-3-1-7/F-PVCp/90 and applicable for in- and outdoor uses.

P213S is a new "softer cloth" version of the P213 for better conformability. Designed for holding coil leads and anchoring terminal boards for insulating coil connections and coil ends.

5015E is a light and age resistant double coated non woven tape designed to make foams self-adhesive for a wide variety of sealing applications.

509AT is a 5.7 mil, double coated, repulpable, flying splice tape. It is primarily used for performing flying splices on various weights & grades of paper stock.

Solder-Mask is an 8.2 mil, impregnated crepe paper, circuit board masking tape. It is designed for masking printed circuit board contact fingers and assembly holes prior to wave soldering.

P272 is a 6 mil, electronic component, reel packaging and sequencing tape. It is engineered to handle a variety of axial lead electronic component reel packaging and sequencing applications.

9605 is a 9 mil double coated polyester tape used for bonding and joining.

5302A is a 13.6 mil polyester film coated on one side with silicone and the other side in acrylic. It is used for bonding and joining.

3161 1MIL is a 2.3 mil PP film that is flame retardant and is used for film wrap capacitors and coil outer wraps. 3161 also has a 3.5 mil option called 3161 2-MIL.

3161 2-MIL is a 3.5 mil PP film that is flame retardant and is used for film wrap capacitors and coil outer wraps. 3161 also has a 2.3 mil option called 3161 1-MIL.

Ribbon Dope thread sealant is 3.5 mil, extruded PTFE of high density used to seal threaded joints on high pressure lines.

7469 is a 7 mil, crepe paper, component reel and sequencing tape. It designed specifically to package axial leaded, high-reliability components.

Hi-Tech is a 6.5 mil, impregnated crepe paper, high temperature, masking and holding tape. It is designed for high temperature hold and clean removal.

318 H-12 is a 2 mil, chip carrier cover tape. It is specifically designed for use in a packaging and carrying system to mount chip-type leadless components onto printed circuit boards.

318 H-15 is a 2 mil, chip carrier cover tape. It is specifically designed for use in a packaging and carrying system to mount chip-type leadless components onto printed circuit boards.

744S is a 7 mil, radial lead, component packaging tape. It is recommended especially for packaging electronic components with radial and stand-up axial leads.

P391 is a 3.5 mil, 1 oz., copper foil, conductive adhesive tape. It is engineered specifically for EMI/RFI shielding.

P389 is a 3.5 mil, 1 oz., copper foil tape. It is expressly designed for use as EMI and RFI shielding on small electro-magnetic componenets.

P100 is a 6.5 mil, aluminum foil/glass cloth tape. It is a high temperature heat and RFI/EMI shielding tape in a convenient, easy-to-apply form.

P111 is a 3 mil, aluminum foil, conductive adhesive tape. It is developed for use as EMI and RFI shielding on small electro-magnetic componenets.

SPV102W is a 4 mil, white PVC with rubber adhesive.

SPV102W is a 4 mil, black PVC with rubber adhesive.

SPV202 is a 5 mil, white or black, PVC with rubber adhesive.

SPV364B is a 2 mil, clear Polyolefin with rubber adhesive.

SPV364C is a 1.8 mil, clear Polyolefin with rubber adhesive.

SPV367 is a 2 mil, clear, polyethylene tape with acrylic adhesive.

3101S is a 4 mil, white with blue lines, polyethylene tape with rubber/resin adhesion.

3633 is a 3 mil, polyolefin film with acrylic adhesive.

3635 is a 3 mil, polyolefin film with acrylic adhesive.

30802 is a 3.2 mil, white, polyethylene with rubber/resin adhesive.

30804 is a 3.2 mil, polyethylene with rubber/resin adhesive.

3067M is a 2.4 mil, blue polyethylene film with rubber backing.

3068M is a 2.4 mil, clear, polyethylene film with rubber adhesive.

4057L is a 2 mil, blue, polyethylene film with acrylic adhesive.

4058L is a 2 mil, clear, polyethylene film with acrylic adhesive.

4057R is a 2 mil, blue, polyethylene film with acrylic adhesive.

4058R is a 2 mil, clear, polyethylene film with acrylic adhesive.

5057A is a 2 mil, blue, polyethylene film with acrylic adhesive.

5058A is a 2 mil, clear, polyethylene film with acrylic adhesive.

SPV3104H5 is a 4 mil, co-extruded polyethylene film with natural rubber adhesive.

30801 is a 3.15 mil, polyethylene film with rubber resin adhesive.

AL300 is a 3.15 mil, blue PVC with acrylic adhesive.

HP-710 is a 7.2 mil, high performance smooth crepe masking tape engineered expressly to meet high-temperature paint masking applications for the automotive assemly plant.

712

587A is a 15 mil, PVC foam, flexographic printing plate mount. It is a dependable mount for both rubber & photopolymer printing plates.

P161

Please use Compar-A-Tape to locate a substitute.

N13F is a 5 mil aluminum foil tape that combines the durability and weatherability of aluminum foil with a high performance acrylic adhesive adding to its performance ability in electrical, housing, and various other markets

Nitto baseless tape 5025T consists of a pressure sensitive modified acrylic adhesive, intended for use as a general mounting tape where a particular high adhesion level on low surface energy substrates is required

Nitto Denko No. 5000NS is a double-coated adhesive tape consisting of a strong, flexible nonwoven fabric impregnated with acrylic adhesive that is applicable to a wide variety of substrates. No. 5000NS offers high tensile strength so it doesn’t tear when peeled and leaves minimal adhesive residue on the substrate to which it was applied even if it remains applied for a long time. The tape can be re-peeled and is ideally suited for applications that require recycling.

Nitto 5790 series are double coated foam tapes, based on a cross linked polyolefine foam, coated with pressure sensitive adhesive, having excellent bonding properties, especially on low energy surfaces.

Nitto 5790-35 is a 35mil double coated foam tape, based on a cross linked polyolefine foam, coated with pressure sensitive adhesive, having excellent bonding properties, especially on low energy surfaces.

Nitto 5790-43 is double coated foam tapes, based on a cross linked polyolefine foam, coated with pressure sensitive adhesive, having excellent bonding properties, especially on low energy surfaces.

Nitto tapes D5952 and D5952N consist of a pressure sensitive modified acrylic adhesive, intended for use as a general mounting tape where a particular high adhesion level is required.

Nitto tapes D5952 and D5952N consist of a pressure sensitive modified acrylic adhesive, intended for use as a general mounting tape where a particular high adhesion level is required.

D9605 series are heavy duty multi-purpose double-coated tapes with a high adhesion level on different substrates such as plastics, foams and metals. The tapes are suitable for rough surface bonding. The PET carrier provides dimensional stability resulting in reduced elongation and shrinkage. D9605 series are available in bobbin shape.

Nitto D9605 series are double-coated tapes with a polyester carrier coated with an aggressive acrylic adhesive used for mounting of different types of plastics. D9605 series are heavy duty multi-purpose double-coated tapes with a high adhesion level on different substrates such as plastics, foams and metals. The tapes are suitable for rough surface bonding. The PET carrier provides dimensional stability resulting in reduced elongation and shrinkage. D9605 series are available in bobbin shape.

Nitto Denko VR-5300 is a double-coated adhesive tape consisting of the special rubber adhesive. This tape offers excellent adhesive strength for a wide variety of substrates, and superior resistance to repulsion force for metals and plastic parts. This tape can be applicable to various rubbers and foams, too.

GA907 is a double-coated adhesive tape consisting of a strong, flexible nonwoven fabric impregnated with acrylic adhesive that is applicable to a wide variety of substrates. GA907 offers high tensile strength so it doesn’t tear when peeled and leaves minimal adhesive residue on the substrate to which it was applied even if it remains applied for a long time. The tape can be re-peeled and is ideally suited for applications that require recycling.

Nitto Denko thermal conductive adhesive tape TR-5325F offers superior thermal conductive property by using the thermal conductive adhesive layer. TR-5325F acquires flammability UL94 V-0 certification. TR-5325F offers excellent workability and processability by adopting the polyester film as base material. The tape can be used various area such as electronics.

Nitto Denko’s GA835CN is a double-coated adhesive tape developed for bonding various components of mobile phones. GA835CN is ideal to adhere to plastic molding, insulation film, nameplates, foam, metal plating and various other types of films. This tape is optimally designed to offer both superior bonding reliability and component bonding performance.

Nitto GA808 is a 5.5 mil durable double coated adhesive tape with excellent initial adhesion. GA808 is a non woven with an acrylic adhesive that has excellent bonding capabilities to various substrates.

Nitto repulpable double-coated tape R9400 consists of a white paper carrier coated on both sides with a water-soluble pressure sensitive adhesive.

Nitto Denko VR-5311 is a double-coated adhesive tapes for rubber fixing. Both products consist combination of rubber adhesive on one side and acrylic adhesive on the other side with polyester carrier. Ideal for bonding rubber with metal or plastic.

GA 606 Double Coated Tape is ideal for bonding various components in home appliances. It adheres well to plastic molding, insulation film, name plates, foam and metal platings. Designed for superior bonding reliability and performance.

GA 608 Double Coated Tape is ideal for bonding various components in home appliances. It adheres well to plastic molding, insulation film, name plates, foam and metal platings. Designed for superior bonding reliability and performance.

1432 is a constrained-layer damper to give effective vibration damping over a wide temperature range.

Nitto Denko thermal conductive adhesive tape TR-5925F offers superior thermal conductive property by using the thermal conductive adhesive layer. TR-5925F acquires flammability UL94 V-0 certification. It can be used various industries, including electronics.

Nitto D5952 is a 3.1 mil double coated tape consisting of a pressure sensitive modified acrylic adhesive, intended for use as a general mounting tape where a particular high adhesion level is required.

SPV 224PRM consists of a blue or clear transparent PVC film coated with a pressure sensitive acrylic-based adhesive. For easy unwind, the backing of the PVC film is coated with a special silicone release.

509N is a 4.0 mil, repulpable, double-coated tissue splicing tape. It is primarily used for static splices on various weights and grades of paper.

RL510 is a 3.1 mil, repulpable flying splice, double-coated tissue. It is expressly designed for the paper industry on various weights & grades of paper stock with high-speed flying splices.

MC2000 is a 2.5 mil, double-coated, thin polyester tape. It is precision engineered for optically clear "see through" applications.

MC2030 is a 4.1 mil, double-coated, thin polyester tape. It is precision engineered for optically clear "see through" applications.

P421 is a 6.5 mil, PTFE film tape. It is ideal for use wherever a slick surface is needed to speed up the movement of materials or reduce equipment wear.

P422 is a 3.5 mil, PTFE film tape. It is ideal for use in the cure process of composite parts, as a release wrap on rollers or as a release ply on molds in the plastics and chemical industries.

P423 is a 3.5 mil, bondable, PTFE film tape. It is the ideal tape where electrical varnishes and epoxy resins are used.

P424 is a 12 mil, PTFE film tape. It is ideal for maximum wear resistance where abrasion is the critical factor in anti-friction applications.

P282 is a 2.2 mil, flame retardant, printable, polyester film tape. It is designed specifically for film-foil and film wrap capacitor applications.

P283 is a 3.3 mil, flame retardant, printable, polyester film tape. It is designed specifically for film-foil and film wrap capacitor applications.

3161-1 Mil, is a 2.3mil, flame retardant, printable, polyester film tape. It is ideal for film-foil and film wrap capacitors.

3161-2, is a 3.5 mil, flame retardant, printable, polyester film tape. It is ideal for film-foil and film wrap capacitors.

P10 is a 6.5 mil, aluminum foil tape laminated to a glass cloth. It is the perfect tape for high temperature applications.

525-20 mil is a 20 mil, double-coated, butyl adhesive tape. It is a cloth based tape thickly coated with a special adhesive mainly composed of synthetic butyl rubber.

525-40 mil is a 40 mil, double-coated, butyl adhesive tape. It is a cloth based tape thickly coated with a special adhesive mainly composed of synthetic butyl rubber.

541 is a 30 mil, double-coated, high-bond, butyl rubber tape. It is developed for applications where high shear strength is required.

P222 is a 3.75 mil, polyimide, film tape. It is engineered for heavy-duty, high temperature applications where 1-mil polyimide doesn't provide adequate strength of physical protection.

P223 is a 4.5 mil, double-coated, polyimide film tape. It provides outstanding thermal endurance and tensile strength at elevated temperatures.

P224 is a 2.5 mil, polyimide, electrical insulating tape. It is ideal for wrapping around small diameters and holding fine magnet wire.

P2401 is a 6.5 mil, polyester film/glass filament oil-filled transformer tape. It is ideally suited for a variety of holding functions in the manufacture of medium & large-size dry type transformers.

354E is a 6.2 mil, epoxy reinforced, insulating tape. It is engineered for use by manufactures of bobbin, stick and form wound coils.

354 is a 6 mil, epoxy reinforced, insulating tape. It is specifically designed for producers of bobbin and stick wound coils and fractional horsepower motors.

P264 is a 6 mil, epoxy reinforced, insulating tape. It is specifically designed for producers of bobbin and stick wound coils and fractional horsepower motors.

P265 is a 6.2 mil, epoxy reinforced, insulating tape. It is engineered for use by manufactures of bobbin, stick and form wound coils.

P212 is a 7.5 mil, glass cloth, electrical insulating tape. It is used wherever superior solvent resistance and flame retardancy are required.

P212HD is a 10 mil, glass cloth, electrical insulating tape. It is used wherever superior solvent resistance and flame retardancy are key requirements.

P320 is a 20 mil, vinyl protection tape. It is a heavy-duty tape which provides a long-lasting seal against moisture, corrosion, electrolytic action and chemical attack.

P335 is a 4 mil, fume protection tape. It is expressly engineered to protect wiring boards from splashes and fumes of cleaning, etching, stripping and plating chemicals.

5035K is a 6.3 mil, non-woven, double coated tissue tape. It is primarily used for splicing paper, films & foils. 5035K is also suitable for laminating, attaching, mounting & holding.

P904 is a 2.4 mil, polyester film, silicone surfaces splicing tape. It is expressly designed for splicing silicone paper and interliners that normally defy adhesive.

P905 is a 1.5 mil, double-coated, silicone surface splicing tape. It is specifically developed for splicing silicone papers and interliners.

P03+ is a 3.0 mil, double-coated, repulpable tissue splicing tape. It is engineered expressly for splicing paper during the manufacturing process.

P904HD is a 3 mil, high termperature/high tensile, polyester splicing tape. It is engineered specifically to splice silicone-coated papers and substrates under high tensile & temperatures.

P907 is a 3.2 mil, self-wound, silicone splicing tape. It is specifically developed for splicing silocone-coated release liners.

500-P is a, 6.3 mil, high performance, double-coated tissue. It is widely used to mount interior automotive trim, bonding foam & mounting nameplates.

P05 is a 6.5 mil, multi-purpose, splicing and mounting tape. It is primarily used for splicing, core starting, bonding leather, adhering trim and for POP displays.

P306 is a, 10 mil, heavy-duty PVC film tape. It is used as a corrosion resistant covering of pipe and conduits. P306 is also used as a moisture barrier on floor panels of commercial aircraft.

P306L is a, 10 mil, heavy-duty, interlined PVC film tape. It is used as a corrosion resistant covering of pipe and conduits or as a moisture barrier on floor panels of commercial aircraft.

Permacel 226 is an 8.5 mil, utility grade, all-weather vinyl electrical tape. It is expressly manufactured for wire splicing, harnessing, conduit protection & electrical repair work.

Nitto 228 is a 7.5 mil, all-weahter, vinyl electrical tape. It is primarily used for insulating, protecting & holding in high voltage electrical appliances.

P12 is a woven cloth laminated with a dead soft aluminum foil. This 16 mil tape is used for sound & vibration damping, sheet metal repair and aircraft stripping mask.

VR-5321 is a, 5.9 mil, double coated polyester. It has a rubber unwind adhesive & an acrylic liner side adhesive. VR-5321 is specifically made to bond vulcanized rubber to non-rubber surfaces.

509A is a 4 mil, double coated, repulpable, flying splice tape. It is primarily used for performing flying splices on various weights & grades of paper stock.

587B is a 20 mil, PVC foam, flexographic printing plate mount. It is a dependable mount for both rubber & photopolymer printing plates.

595B is a high temperature, acrylic adhesive transfer tape. It is primarily used for splicing, mounting & laminating at high processing temperatures.

P166 is a 9.0 mil, mono-filament glass reinforced, polyester strapping tape. It is expressly designed for wax-coated boxboard, metal surfaces, equipment parts and furniture holding.

P30-105 is a 10 mil, heavy-duty, vinyl electrical tape. It is primarily used for insulating bus bar & cable connections, bundling lead wires & wrapping hose harnesses.

P221 is a 2.75 mil electrical tape primarily used as a ground or insulation in electrical applications and printed circuit board masking.

P703 is a 6.5 mil crepe paper masking tape primarily used for high temperature paint masking.

3250 is a 2.8 mil, static resistant, polypropylene package sealing tape primarily used for electronic components and clean room applications.

P771 is obsolete the alternate is P781. P771 is a 7 mil, high temperature, premium paper masking tape. It is expressly engineered for production line masking of polyurethane paint systems.

P790 is a 5 mil general purpose paper masking tape. It is primarily used for room temperature paint masking, package sealing, holding, bundling, reinforcing, roll start-up and paper splicing.

P169 is a 6.0 mil, mono-filament glass reinforced, polyester strapping tape. It is used for bundling, sealing, palletizing and reinforcing in medium-duty applications.

P170 is a 5.0 mil, glass reinforced, polypropylene strapping tape. It is an all purpose bundling, sealing, palletizing and reinforcing tape.

Nitto 224R is a 3 mil PVC surface protection vinyl tape for stainless steel and coated optical glass. Proven to be an excellent protective film for buildings paneled with stainless steel, aluminum or glass.

Please use Compar-A-Tape to locate a substitute.

Please use Compar-A-Tape to find a substitute.

Please use Compar-A-Tape to locate a substitute.

Please use Compar-A-Tape to locate a substitute.

Please use Compar-A-Tape to locate a substitute.

Please use Compar-A-Tape to locate a substitute.

Please use Compar-A-Tape to locate a substitute.

Please use Compar-A-Tape to find a substitute.

Please use Compar-A-Tape to find a substitute.

Please use Compar-A-Tape to find a substitute.

Please use Compar-A-Tape to find a substitute.

Please use Compar-A-Tape to locate a substitute.

Please use Compar-A-Tape to locate a substitute.

Please use Compar-A-Tape to locate a substitute.

Please use Compar-A-Tape to locate a substitute.

Please use Compar-A-Tape to locate a substitute.

Please use Compar-A-Tape to locate a substitute.

Please use Compar-A-Tape to locate a substitute.

Please use Compar-A-Tape to locate a substitute.

Please use Compar-A-Tape to locate a substitute.

Please use Compar-A-Tape to locate a substitute.

Please use Compar-A-Tape to locate a substitute.