Budnick Converting ^®

Scapa 1801 is a 25 micron Kapton polyimide film single coated with a cured silicone adhesive system, and has a 67 micron total thickness. It is recommended for a variety of high temperature protection and insulation applications.

116 is a 10.5 mil, vinyl coated, cloth gaffer's tape. It is primarily used to hold down wires or carpet where a non-reflective finish is desired.

Dublfilmr 174 is a 13 mil, double coated, woven cotton cloth tape. It is primarily used for carpet installation and temporary mounting.

P3124.156 is a 5/32" medium density, open cell, PVC foam tape with an acrylic pressure sensitive adhesive. It is primarily used for air or dust sealing when abrasion resistance is desired.

Duofoamr is a 1/64" high density polyurethane foam that is double coated with a acrylic adhesive. It is primarily used for exterior automotive trim, badging, scripting and cladding.

Dublfilmr S234 is 3.25 mils, double coated polyester, high tack, acrylic pressure sensitive film. It is primarily used for splicing of paper and general bonding.

Dublfilm® S268 is a 2.75 mil, thin double coated film. It is primarily used for labels and bonding applications.

Dublfilmr S301 is a 8.5 mil, double coated, UPVC film. It is primarily used for difficult bonding and splicing applications.

Dublfilm® S305 is a 2.55 mil, permanent/removable polyester tape. It is primarily used as protective pads in laminating and for temporary mounting, labeling, and packaging.

Dublfilm® S313-76 is a 3.2 mil, double coated polyester tape. It is primarily used for photo mounting applications.

Dublfilmr S662 is a 3.2 mil, double coated polyester film. It is primarily used for consumer and industrial assembly applications.

Dublfilmr S711 is a 3.8 mil, non-woven/double coated, tissue. It is primarily used for general bonding and decorative parts.

Dublfilmr SA307E is a 3.0 mil, double coated, polyester tape. They are primarily used for photo mounting, faceplates and application to decorative parts.

Dublfilmr SA357E is a 3.5 mil, double coated polyester tape. It is primarily used for faceplates, application to decorative parts and photo mounting.

Dublfilmr SA457E is a 4.5 mil, double coated polyester tape. It is primarily used for faceplates, application to decorative parts and photo mounting.

Dublfilmr SA304E is a 3.0 mil, double coated polyester tape. It is primarily used for photo mounting, faceplates, and application to decorative parts.

Dublfilmr SB857P is a 8.5 mil, double coated polypropylene film. It is primarily used for bonding of plastics and lamination to rubbers and foams.

Dublfilmr SP407T is a 5.5 mil, double coated, tissue. It is primarily used for assembly aid, bonding to EPDM rubber and foam fabrication.

Dublfilmr SG357E is a 3.5 mil, double coated, polyester film. It is primarily used for decorative parts, general bonding and resealing of polybags.

Dublfilmr S3400 is a 13 mil, fire retardant double coated cloth tape. It is primarily used for aircraft carpeting and fastening of floor covering products.

Dublfilmr S3401 is a 13 mil, fire retardant double coated cloth tape. It is primarily used for installation of aircraft carpeting and fastening of floor covering products.

110 is an 11 mil, black, cotton cloth tape. It is single coated with a black, natural rubber adhesive. 110 is primarily used for wire harnessing, bundling, holding and sealing.

Dublfilmr S4927 is a 6.7 mil, double-coated, fire retardant woven cloth tape. It is primarily used on installation of carpeting in airplanes and fastening floor covering products.

Dublfilmr SP357E is a 3.5 mil, thin double coated polyester tape. It is primarily used for foam and sound, splicing applications, assembly aid, and lamination.

Dublfilmr SP457E is a 4.5 mil, double coated polyester tape. It is primarily used for assembly aid, foam gasketing and sound attenuation, and lamination to rubber.

Dublfilmr 4405 is a PVC film coated on both sides with a rubber based adhesive. It is primarily used in print-finishing applications and all substrates.

Dublfilmr S975A is a 4.75 mil, double coated polyester tape. It is primarily used for bonding to surfaces, foams and pads.

Dublfilmr S972A is a 4.75 mil, double coated polyester tape. It is primarily used for bonding to foams and gaskets.

Dublfilmr S843A is a 8.5 mil, double coated polypropylene film. It is primarily used for assembly of interior decorative trim and attachments of labels.

Dublfilmr S842A is a 2.55 mil, differentially coated polyester tape. It is primarily used for attachment of labels and assembly of interior decorative trim.

Dublfilmr S841A is a 2.75 mil, differentially coated polyester tape. It is primarily used for temporary labels and other temporary bonding applications.

Dublfilmr S840A is a 3.8 mil, double coated tissue tape. It is primarily used for assembly of interior decorative trim and attachment of labels.

Dublfilmr S839A is a 3.25 mil, double coated polyester tape. It is primarily used for assembly of interior decorative trim and attachment of labels.

Dublfilmr SP507T is a 6.5 mil, double coated tissue tape. It is supported with an adhesive tape that is aggressive and fast grabbing.

Polyflexr 134 is a 9.0 mil, single coated polyethylene tape. It is primarily used for masking of windows and doors, greenhouse repair and wrapping applications.

Polyflexr 135 is a 7.0 mil, single coated polyethylene tape. It is primarily used in wire identification, surface protection and polyethylene splicing.

Polyflexr 136 is a 9.0 mil, single coated polyethylene tape. It is primarily used in wire identification, surface protection and polyethylene splicing.

141 is a 7.0 mil, utility grade duct tape. It is primarily used for taping of metal ductwork and general purpose bundling or sealing.

142 is a 8.5 mil, utility grade duct tape. It is primarily used for taping of metal ductwork and general purpose bundling or sealing.

145 is a 17 mil, heavy duty duct tape. It is primarily used for taping of metal ductwork and heavy duty applications.

146 is a 13.0 mil, professional grade duct tape. It is primarily used for taping of metal ductwork and heavy duty applications.

149 is a 9.5 mil, low residue duct tape. It is primarily used for taping of metal ductwork and applications requiring a conformable product and low residue performance.

163 is a 10.0 mil, single coated cotton cloth tape. It is primarily used for electrical maintenance, holding on wire harnessess and general repairs.

Scapa 164 is a 9.5 mil, single coated cloth tape. It is primarily used in wire harness wrapping and assembly.

300 is a 12.0 mil, single coated tape. It is primarily used for small diameter pipe joints and tees.

511 is a 1.5 mil, non-silicone fume protection tape. It is primarily used for protection on printed circuit boards from chemical fumes or splashes.

512 is a 3.0 mil, silicone splicing tape. It is primarily used to splice various types of substrates.

524 is a 4.0 mil, silicone splicing tape. It is primarily used for splicing various types of substrates.

525 is a 2.0 mil, acrylic splicing tape. It is primarily used to splice all non-silicone surfaces.

526 is a 3.5 mil, acrylic splicing tape. It is primarily used for splicing of all non-silicone substrates.

534 is a 3.0 mil, PCB cleaning tape. It is primarily used for cleaning dirt from printed circuit boards and other surfaces.

554 is a 3.5 mil, polymide film tape. It is primarily used for high temperature masking and electrical insulation.

556 is a 2.6 mil, polyimide film tape. It is primarily used for high temperature masking and protects circuit boards gold finger contacts.

561 is a 2.2 mil, polyimide film tape. It is primarily used where electrostatic discharge is a concern.

574 is a 2.0 mil, modified silicone fume protection tape. It is primarily used for protection of printed circuit boards from chemical fumes or splashes.

570 is a 2.0 mil. silicone splicing tape. It is primarily used for splicing of silicone surfaces, labels, films, and specialty papers.

571 is a 2.5 mil, silicone splicing tape. It is primarily used to adhere to silicone papers and films and other difficult surfaces.

572 is a 3.5 mil, photo splicing tape. It is primarily used for attaching film to leader card on photo developing and printing machines.

572LS is a 3.5 mil, photo splicing tape. It is primarily used for attaching film to leader card on photo developing.

573 is a 2.5 mil, silicone splicing tape/aerospace flash removal. It is primarily used to adhere to silicone-coated papers and films.

574NS is a 2.0 mil, non-silicone fume protection tape. It is primarily used for protecting printed circuit boards from fumes or splashes.

575 is a 3.0 mil, PCB plating tape. It is primarily used for protecting printed circuit boards from harsh chemicals during plating or stripping of gold contact fingers.

576 is a 4.0 mil, PCB plating tape. It is primarily used for protecting printed circuit boards from harsh chemicals and fumes.

577 is a 3.5 mil, PCB plating tape. It is primarily used for protecting printed circuit boards from chemicals and fumes.

578 is a 4.1 mil, PCB plating tape. It is primarily used for protecting printed circuit boards from harsh chemicals during plating or stripping of gold contact fingers.

579 is a 4.0 mil, PCB plating tape. It is primarily used for SMOBC boards and with mild heat as a regular plating tape on all circuit boards.

581 is a 2.9 mil, SMOBC plating tape. It is primarily used for protecting printed circuit boards from chemicals during plating or stripping of gold contact fingers.

582 is a 3.0 mil, it is primarily used to adhere to silicone coated papers and films as well as to other difficult bond surfaces.

586 is a 2.9 mil, PCB plating tape. It is primarily used to protect circuit boards during plating or stripping of gold finger contacts.

592 is a 3.3 mil, high temperature masking tape. It is primarily used for masking in powder coating applications.

595L is a 2.6 mil, silicone splicing tape. It is primarily used for splicing of all non-silicone substrates.

598 is a 3.0 mil, easy release silicone splicing tape. It is primarily used for splicing of all adhesive coated tapes and labels.

650 is a 7.0 mil, wave solder tape. It is primarily used for protecting printed circuit board components during the wave solder process.

653 is a 6.0 mil, hot air leveling and wave soldering tape. It is primarily used to protect circuit boards from gold finger contacts.

655 is a 7.3 mil, hot air leveling and wave soldering tape. It is primarily used for cost effective circuit board masking during hot air leveling and wave soldering.

RollerMate P2410 is a 21 mil, silicone coated release tape. It is primarily used to wrap rollers that come in contact with adhesives, inks, and coatings.

Bioflexr RX216V.42 is a 2.0 mil, single coated medical foam tape. It is primarily used as medical device fabrication, bandages and ECG electrodes.

Bioflexr RX222P is a 10.0 mil, medical pressure sensitive tape. It is primarily used for securing intravenous tubes and holding gauze dressings in place.

Bioflexr RX232V.42 is a 33.0 mil, single coated medical foam tape. It is primarily used in medical device fabrication, specialty bandages and ECG Electrodes.

Bioflexr RX341P is a 2.5 mil, single coated medical film tape. It is primarily used for medical device fabrication and specialty bandages.

Bioflexr RX607P is a 4.5 mil, single coated pressure sensitive adhesive film. It is primarily used for surgical tape and electrodes and various medical devices.

Bioflexr RX718P is a 30.0 mil, single coated medical pressure sensitive tape. It is primarily used for specialized bandages and roll form bandages.

Bioflexr RX630P is a 9.75 mil, medical heat sealable tape. It is primarily used for applications that require heat for bonding.

T3601 is a 8.5 mil, fire retardant duct tape. It is primarily used in installation of aircraft cargo liners.

T3605 is a 14.0 mil, fire retardant, single coated cloth tape. It is primarily used for joining, sealing, and repairing aircraft cargo compartment liners.

RollerMate P2411 is a 16.0 mil, silicone coated release tape. It is primarily used for surfaces that come in contact with adhesives or coatings.

P3215 is a 9 mil, fire retardant, single coated tape. It is primarily used as a tough, effective, moisture barrier in galley and lavatory areas to contain spills.

Bioflexr RX100P is a 14.0 mil, single coated medical pressure sensitive tape. It is primarily used on ECG electrodes, bandages and TENS.

Bioflexr RX124P is a 10.5 mil, medical pressure sensitive tape. It is primarily used as a waterproof dressing tape for first aid applications.

Bioflexr RX132P is a 2.5 mil, single coated medical pressure sensitive tape. It is primarily used as medical device fabrication and specialty bandages.

P178 is a 5 mil, aluminum foil tape. It is primarily used for sealing, decorative, heat sink and shielding.

Scapa P3124.188 is a medium density, open cell, PVC foam single coated with an acrylic pressure sensitive adhesive. It is primarily used for air or dust sealing when abrasion resistance is desired.

P3239.250 is a 125.0 mil, single coated foam tape. It is primarily used in weather sealing applications here a "make or break" seal is required.

P3097.125 is a 125.0 mil, single coated foam tape. It is primarily used in reducing sound transmission and compensates for uneven surfaces and seals between window frames and waterboard cladding.

P3097.188 is a 187.5 mil, single coated foam tape. It is primarily used in reducing sound transmission and compensates for uneven surfaces and seals between window frames and waterboard cladding.

P3097.25 is a 250.0 mil, single coated foam tape. It is primarily used for reducing sound transmission and compensates for uneven surfaces and sealing between window frames and waterboard cladding.

P3099.125 is a 125.0 mil, single coated foam tape. It is primarily used for reducing sound transmission and compensates for uneven surfaces and sealing between window frames and waterboard cladding.

P3099.188 is a 187.5 mil, single coated foam tape. It is primarily used for reducing sound transmission and compensates for uneven surfaces and sealing between window frames and waterboard cladding.

P3099.25 is a 250.0 mil, single coated foam tape. It is primarily used for reducing sound transmission and compensates for uneven surfaces and sealing between window frames and waterboard cladding.

P3594.125 is a 125.0 mil, flame retardant PVC foam waterseal. It is primarily applied between the L and T bars, and ceiling tiles and the wall.

P3594.188 is a 187.5 mil, flame retardant PVC foam waterseal. It is primarily applied between the L and T bars, and ceiling tiles and the wall.

Bioflexr RX416VSA is a 67.6 mil, double coated medical pressure sensitive tape. It is primarily used in medical device fabrication and specialty bandages.

Bioflexr RX432VSA is a 35.6 mil, double coated medical pressure sensitive tape. It is primarily used for medical device fabrication and specialty bandages.

Duofoamr S3407 is a 25.0 mil, double coated acrylic foam tape. It is primarily used for adhesion to a wide variety of surfaces and provides an excellent tack, peel, and holding power.

Duofoamr S3408 is a 15.5 mil, double coated acrylic foam tape. It is primarily used for adhesion to a wide variety of surfaces and provides excellent tack, peel and holding power.

Duofoamr S5300A is a 25 mil, solid acrylic tape. It is primarily used for a wide range of weathering and temperature conditions without losing adhesion.

S5300B is a 45 mil, acrylic mounting tape. It is primarily used for a wide range of weathering and temperature conditions without losing adhesion.

S5300C is a 60 mil, acrylic mounting tape. It is primarily used to provide a superior bond between a wide variety of substrates.

S5300D is a 80.0 mil, acrylic mounting tape. It is primarily used for providing a superior bond between a wide variety of substrates.

Duofoamr S5589 is a double coated foam mounting tape. It is primarily used for automotive emblems and badging, exterior trim and door step plates.

Duofoamr S846VA is a 36.9 mil, double coated foam mounting tape. It is primarily used for mounting and bonding where heat resistance is required.

Duofoamr S847VA is a 254.0 mil, double coated foam mounting tape. It is primarily used for assembly of wing mirrors and interior components.

Duofoamr S848VA is a 69.0 mil, double coated foam mounting tape. It is primarily used for assembly of wing mirrors and interior components.

Duofoamr S849VA is a 1/32", double coated foam mounting tape. It is primarily used for a variety of surfaces and provides excellent tack, peel and holding power.

Duofoamr SJ432V is a 1/32", double coated polyethylene foam. It is primarily used for a wide variety of surfaces, including metals and engineered plastics and is heat resistant.

Duofoam r SJ416V is a 1/16", double coated polyethylene foam. It is primarily used for a wide variety of surfaces, metals and engineered plastics.

Duofoamr SR508V is a 1/8", double coated polyethylene foam. It is primarily used for mounting applications and has good adhesion to a wide variety of surfaces.

Duofoamr SR516V is a 1/16", double coated polyethylene foam. It is primarily used for mounting applications to a variety of surfaces.

Duofoamr SR516VB is a 1/16" black double coated polyethylene foam. It is primarily used for mounting applications to a wide variety of surfaces.

Duofoamr SR532V is a 1/32", double coated polyethylene foam. It is primarily used for mounting applications to a wide variety of surfaces.

Duofoamr SR532VB is a 1/32", double coated polyethylene foam. It is primarily used for mounting applications to a wide variety of surfaces.

U3400C is a 20.0 mil, acrylic mounting tape. It is primarily used for providing a superior bond between a wide variety of substrates.

U3400E is a 40.0 mil, acrylic mounting tape. It is primarily used as a superior bond between a wide variety of substrates.

Unifilmr U620A is a 5 mil, unsupported pressure sensitive adhesive film. It is primarily used for adhering to a wide variety of surfaces, metals, foams, and engineered plastics.

Unifilmr U621A is a 2 mil, unsupported adhesive transfer film. It is primarily used in high temperature gasketing and general purpose assembly applications.

Unifilmr U624A is a 5 mil, unsupported adhesive transfer film. It is primarily used for high temperature gasketing and general purposes assembling applications.

Unifilmr UB2070 is a 2 mil, unsupported pressure sensitive adhesive film. It is primarily used where high initial adhesion is required, foam gasketing and sound attenuation.

Unifilmr UB5070 is a 5 mil, unsupported pressure sensitive adhesive film. It is primarily used for applications where high initial adhesion is required, foam gasketing and sound attenuation.

Unifilmr UP3040 is a 3 mil, unsupported pressure sensitive adhesive film. It is primarily used for product assembly and lamination to foam for gasketing and sound control.

Unifilmr UP4080 is a 4 mil, unsupported pressure sensitive adhesive film. It is primarily used for product assembly and has a good adhesion to a wide variety of urethane foams.

Unifilmr UP5040 is a 5 mil, unsupported pressure sensitive adhesive film. It is primarily used for product assembly and lamination to foam for gasketing and sound control.

Unifilmr UV201 is a 2 mil, unsupported acrylic adhesive transfer film. It is primarily used for a wide variety of surfaces, metals and engineered plastics.

Unifilmr UC10 is a 1 mil, unsupported pressure sensitive adhesive film. It is primarily used for high temperature gasketing, nameplates, faceplates, membrane switch fabrication.

Unifilmr UC20 is a 2 mil, unsupported pressure sensitive adhesive film. It is primarily used for high temperature gasketing, nameplates, faceplates, and membrane switch fabrication.

Unifilmr UC30 is a 3 mil, unsupported pressure sensitive adhesive film. It is primarily used for nameplates, faceplates, membrane switch fabrication and high temperature gasketing.

Unifilmr UC40 is a 4 mil, unsupported pressure sensitive adhesive film. It is primarily used for nameplates, faceplates, membrane switch fabrication and high temperature gasketing.

Unifilmr UC50 is a 5 mil, unsupported pressure sensitive adhesive film. It is primarily used for nameplates, faceplates, membrane switch fabrication and high temperature gasketing.

Unifilmr UJ20 is a 2 mil, unsupported pressure sensitive adhesive film. It is primarily used for nameplates, lamination to foam for gasketing and sound control and application of decorative parts.

Unifilmr UJ30 is a 3 mil, unsupported pressure sensitive adhesive film. It is primarily used for nameplates, lamination to foam for gasketing and sound control and application of decorative parts.

Unifilmr UJ40 is a 4 mil, unsupported pressure sensitive adhesive film. It is primarily used for nameplates, lamination to foam for gasketing and sound control and application of decorative parts.

Unifilmr UJ50 is a 5 mil, unsupported pressure sensitive adhesive film. It is primarily used for nameplates, lamination to foam for gasketing and sound control and application of decorative parts.

Unifilmr UA10 is a 1 mil, unsupported pressure sensitive adhesive film. It is primarily used for nameplates, faceplates, membrane switch fabrication, and general bonding and mounting.

Unifilmr UA202 is a 2 mil, unsupported pressure sensitive adhesive film. It is primarily used for nameplates, faceplates, membrane switch fabrication and general bonding and mounting.

Unifilmr UA40 is a 4 mil, unsupported pressure sensitive adhesive film. It is primarily used for nameplates, faceplates, membrane switch fabrication and general bonding and mounting.

Unifilmr UA50 is a 5 mil, unsupported pressure sensitive adhesive films. It is primarily used for nameplates, faceplates, membrance switch fabrication, and general bonding and mounting.

Unifilmr 802 is a 2.0 mil, unsupported adhesive transfer. It is primarily used for water shedder attachment, interior trim assembly and temporary attachment during assembly.

Unifilmr 805 is a 5.0 mil, unsupported adhesive transfer. It is primarily used for water shedder attachment, interior trim assembly and temporary attachment during assembly.

Unifilmr TD200 is a 2.0 mil, unsupported adhesive transfer. It is primarily used for artists mounting applications, product assembly, report covers, packaging and design prototypes.

Unifilmr TD500 is a 5.0 mil, unsupported adhesive transfer. It is primarily used for a variety of Artists' mounting applications, product assembly, report covers, packaging, and design prototypes.

Unifilmr U121-2.5 is a 11.0 mil, unsupported adhesive transfer. It is primarily used for bond road tile markers to asphalt, bonding to difficult applications and rough surfaces.

Unifilmr U263-1 is a 1.9 mil, unsupported adhesive transfer. It is primarily used in flying splice, nameplates, envelope closure and application of decorative parts.

Unifilmr U477 is a 2 mil, electrically conductive adhesive transfer. It is primarily used in EMI/RFI shielding.

Unifilmr U616A is a 5.0 mil, unsupported adhesive transfer. It is primarily used for bonding of low surface energy plastics, lamination to EPDM rubbers and urethane foams and component assembly.

Unifilmr U617A is a 3.0 mil, unsupported adhesive transfer. It is primarily used as lamination to foam for gasketing and NVH, trim attachment and assembly.

Unifilmr U618A is a 4.0 mil, unsupported adhesive transfer. It is primarily used for lamination to foam for gasketing and NVH, trim attachment and assembly.

Bioflexr Rx170S is a 13.0 mil, medical double coated cloth. It is primarily used for ostomy and toupee holding applications.

Bioflexr RX581S is a 5.0 mil, medical double coated polyethylene. It is primarily used for surgical drape fabrication and applications where improved adhesion is required.

Scapa 228 is a 11.0 mil, flame retardant vinyl coated cloth. It is primarily used for wire harness splicing, clip retention, NVH and protective harness wrapping.

Scapa 243 is a 10.0 mil, automotive wire harness splicing tape. It is primarily used for automotive wire harness splicing, cavity sealing, component attachment, bundling or sealing.

248 is a 11.0 mil, industrial grade duct tape. It is primarily used for taping of metal ductwork and industrial applications.

167 is a 14.0 mil, cohesive friction tape. It is primarily used in secondary wrap for electrical maintenance and spot holding on wire harnesses.

177 is a 10.0 mil, single coated cotton cloth tape. It is primarily used as exceptional electrical tape, wire harness wrap and bundling applications.

Ultrafilm™ 6300 is a 3.0 mil, specialty unsupported adhesive transfer. It is primarily used for sound attenuation, vibration dampening, automotive decorative trim and carpeting.

Unifilmr U261 is a 5.0 mil, unsupported adhesive transfer. It is primarily used for flying splices, decorative parts, nameplates and envelope closure.

Unifilmr UP20 is a 2.0 mil, unsupported adhesive transfer. It is primarily used for lamination to foam for gasketing and sound control, decorative parts and product assembly.

Unifilimr UP30 is a 3.0 mil, unsupported adhesive transfer. It is primarily used for lamination to foam for gasketing, sound control, decorative parts and product assembly.

Unifilmr UP50 is a 5.0 mil, unsupported adhesive transfer. It is primarily used for lamination to foam for gasketing, sound control, application of decorative parts and product assembly.

Unifilmr UB10 is a 1 mil, unsupported adhesive transfer. It is primarily used for nameplates, faceplates, and bonding to low surface energy plastics.

Unifilmr UB20 is a 2 mil, unsupported adhesive transfer. It is primarily used for nameplates, faceplates, and bonding to low surface energy plastics.