Budnick Converting ^®

425 is a 4.6 mil self wound aluminum foil tape. It is primarily used indoor or outdoor for many long term applications.

427 is a 4.6 mil, aluminum foil tape. It is primarily used indoors or outdoors for many long term applications.

223 is a 10 mil polyethylene-coated cloth duct tape. It is primarily used for duct sealing, holding insulation, and a variety of general industrial applications.

360-45 is a 45mil, aluminum foil, all weather duct tape, primarily used for instant water tight bonds.

P11 is a 5 mil, dead soft aluminum foil tape primarily used for sealing, heat shielding and as a protective cover for critical parts.

AF75 is a 5.0 mil, general purpose, linerless, aluminum foil tape. It is used for masking off areas when painting and electroplating.

AF973 is a 3.5 mil, general purpose, aluminum foil tape. It is used in HVAC industry, lane marking & temporary repairs of steel and aluminum truck bodies, mufflers and metal containers.

AF982 is a 7.0 mil, maximum strength, foil/scrim/kraft (FSK) tape. It is used in sealing seams in scrim reinforced foil duct insulation.

488 is a 2 mil, alloy aluminum foil backing used with fiberglass duct-board to provide a dependable vapor barrier to the insulating system.

489 is a self-wound 3 mil aluminum foil tape with an acrylic adhesive. It is used as a water proofing vapor barrier and air leakage protection. It has excellent protection for masking operations in electroplating. The aggressive adhesive provides high tack performance with excellent cohesive strength.

428 AWF is a conformable foil/skrim/kraft lamination or all service jacket used for sealing cold and dual temperature duct & pipe systems where the basic insulation uses ASJ facing.

587 is a 2.3 mil, aluminum foil engineered to ensure integrity of both fiberglass duct-board systems. Used on all joints to assure the vapor barrier integrity of the duct system.

IdealSeal® 777 is the new multi-layer aluminum foil laminate that easily covers and fully protects ductwork and piping under a wide range of conditions. This cladding material can also be used to seal foil-faced insulation, reflective insulators, duct wraps, and seams in refrigeration components.

788 is a nominal 2 mil, premium grade aluminum foil coated one side with 1.5 mil of a pressure sensitive high performance blue acrylic adhesive and protected by a paper release liner. The blue acrylic adhesive was designed for extreme cold weather applications.

888SSL is a 3.1 mil, double coated, polyester film engineered to secure the longitudinal lap of pipe covering jackets. It replaces liquid adhesives to complete the vapor barrier.

FL1000 is a 4.2 mil, single coated foil tape suitable for die-cut shapes, shielding, moisture and vapor barrier sealing components.

DUCTCLO 3710 is an 11.8 mil, 63 mesh high tensile polyethylene-coated cloth with a natural rubber with synthetic resin adhesive. It is a superior performance duct tape specifically designed for the high demand of contractor applications.

DUCTCLO 3720 is an 11.8 mil, 70 mesh high tensile film with a high quality polyethylene coated cloth and a natural rubber with synthetic resin adhesive in fluorescent colors. It is a superior performance duct tape specifically designed for the high demand contractor applications.

DUCTCLO 3740 is an 11.8Mil, 70 mesh, high quality polyethylene-coated cloth duct tape with natural rubber/synthetic adhesive. This striped safety warning tape is used for permanent and temporary marking of hazardous areas, aisles, stairs, wires, cords, and more.

DUCTFOIL 4030 is a 3.6mil aluminum foil tape consisting of a 2mil dead soft aluminum foil coated with an extremely aggressive synthetic rubber adhesive and a removable release liner. The adhesive system provides a tight positive grab when smoothed down on work surfaces.

DUCTFOIL 4050 is a 3.25Mil self-wound alluminum foil tape consisting of a 2mil dead soft malleable aluminum coated with acrylic adhesive. The malleable foil conforms well to irregular surfaces.

DUCTFOIL 4060 is a 4.8mil aluminum foil tape consisting of a 3mil high strength dead soft aluminum foil coated with an aggressive solvent-based acrylic adhesive and an easy removable paper liner.

DUCTFOIL 4000 is a 2.8 mil economical aluminum foil tape consisting of a 1.2mil dead soft aluminum foil coated with a solvent based acrylic adhesive wound with a removable paper release liner.

DUCTFOIL 4070 is a 5Mil high strength self-wound aluminum foil tape consisting of a 3 mil dead soft aluminum foil coated with an aggressive acrylic adhesive system to create a superior bond.

DUCTFOIL 4080 is a 6.8mil high strength aluminum foil tape consisting of a 5 mil aluminum foil combined with a high performance solvent-based acrylic adhesive protected by an easy release silicone paper.

DUCTFOIL 4090 is a 6.8 Mil aluminum foil tape featuring a dead soft aluminum foil/3-way fiberglass scrim/paper carrier coated with an aggressive solvent-based acrylic adhesive carried on a 3.2 mil removable paper release liner.

DUCTFOIL 4092 is a 6.8 Mil aluminum foil tape featuring a dead soft aluminum foil/3-way fiberglass scrim/paper carrier coated with an aggressive synthetic rubber resin adhesive carried on a 3.2 mil removable paper release liner.